CipherLab RK95 Reference Manual page 172

RK95 Mobile Computer
The available commands are devided into 6 groups:
SEND BARCODE DATA
"Send Barcode Data" actions affect the output character field and the output length
(count of characters). All the other kinds of actions must collaborated with the "Send
Barcode Data" actions to reformat the barcode data to be sent out.
Command
Send up to character
Send up to
Send up To specific string
Send remaining
Send remaining and skip
To set a specific character as a period, and only the part anterior to
this specific character will be output.
Example
The decoded data:
Actions:
The output data:
To set how many characters to be output.
Example
The decoded data:
Actions:
The output data:
To send the part up till the specific string (this specific string is
excluded).
Example
The decoded data:
Actions:
The output data:
This command works with those commands of "Move Cursor" to send
the data posterior to the cursor.
Example
The decoded data:
Actions:
The output data:
To send all the data (posterior to the cursor) aside from the last
character(s) you set.
Example
The decoded data:
Actions:
The output data:
168
Description
0001112223334
Send data up to "3".
000111222
0001112223334
Send up to "3" characters.
000
0001112223334
Send up to the string "333".
000111222
0001112223334
Move cursor to next 1.
Send all the data that remains.
001112223334
0001112223334
Send all the data that remains and skip the
last 1.
000111222333