Cleaning The Filters In The Water Intake Hose - Whirlpool WFCR 86430 Health & Safety, Use And Care And Installation Manual

CLEANING THE FILTERS IN THE WATER INTAKE HOSE

1
. Close the water tap and unscrew the intake
hose.
1
2
2
.
the hose using a brush.
3
. At this point, manually unscrew the intake hose
from the back of the washer dryer. Using pliers,
of the washer dryer and clean it.
18 18
4
.
hose to the water tap and the washer dryer. Do
not use tools to connect the intake hose. Open
the water tap and check to make sure that all the
connections have been tightened properly.
2
1
. Reconnect the intake