FUTABA T12Z Software Update page 7

Hide thumbs Also See for T12Z:
Table of Contents

Advertisement

5.
The function name may be displayed in 10
characters or 4 characters, depending on the
setup screen. For 4 characters display, input the
function name as required.
Timer
A timer can now be set to maintain its value even
when the power is turned off or the model is
switched.
1.
Open [TIMER] of the Linkage Menu.
2.
Select "MEMORY" and turn the DATA dial and
switch the display to [ON] or [OFF].
※ The display blinks.
[ON] : Memory mode. The timer value is held
even after power off and model switching.
[OFF] : The timer is reset by power off and model
switching as in the past.
3.
When the DATA button is pressed, the setting is
changed.
Trim display units
Percentage (%) display can be selected at trim.
1.
Open [DIAL MONITOR] of the Linkage Menu.
2.
Turn the DATA dial and switch "TRIM UNIT" to
[%] or [-].
※ The display blinks.
[%] : Trim is displayed in % units.
[--] : Trim is displayed numerically the same as in
the past.
3.
When the DATA button is pressed, the setting is
changed.
Volume modification
The volume can be set according to the type of sound.
The types of sound which can be selected are:
Key operation sound
Error/Warning sound
Trim and center click sound
Timer event sound
Other sound
1.
Select [SOUND] of the System Menu and press
the DATA button.
2.
The volume setup screen opens.
3.
Select the item whose volume is to be set. When
the DATA dial is turned clockwise, the volume
increases
and
counterclockwise, the volume decreases. When
the DATA button is held down, the volume is reset
to the initial value.
For safety, the error/alarm sound cannot be set to
below a certain volume.
Japanese/German display compatibility
The set has been made compatible with Japanese and
German display.
Display switching
1.
Open [INFORMATION] of the System Menu.
2.
Turn the DATA dial and select the display
language.
※ The display blinks.
[ENGLISH] : English mode
[JAPANESE] : Japanese mode
[GERMAN] : German mode
3.
When the DATA button is pressed, the setting is
changed.
- 7 -
when
the
dial
is
turned

Advertisement

Table of Contents
loading

Table of Contents