Table of Contents
Advertisement
4. LUBRICATION
(1) Please make sure to turn power switch off before lubricating.
(2) Please pay attention that oil does not get on your skin or in your eyes as it may cause an inflammation.
(3) Please make sure to keep oil out of the reach of children who may drink oil by mistake.
(4) Please make sure to lubricate when operating for the first time after the installation. Also, please make
sure to check the amount of oil when the machine has not been used for a long time.
[Notice] Please use a pulley oil SF oil.
4-1. Oiling
Before proceeding with operation, be sure to lubricate, as necessary, parts A to K indicated by the
arrows in the figure.
A
Needle plate
4-2. Filling the oil tank
Draw out the oil gauge at top face of machine
bed, supply oil up to the depth k. Insufficient oil
reservation may induce the burning due to
interrupted oil supply to the hook, each section of
bed. Make sure to check the indication on the oil
gauge so as to replenish oil timely.
CAUTION
C
B
E
F
G
Machine bed
- 6 -
D
K
Oil gauge
Needle plate
Machine bed
J
H
I
k
Slide plate
(right)
Advertisement
Table of Contents
