ExcelPool Products Excelpool Salt System Installation And Operation Manual page 14

DESIRED LEVEL ADJUSTMENT KNOB
This setting is used to control the amount of chlorine the
Excelpool System generates. Adjust this setting to increase or
decrease the chlorine output level. The reading is from 5
percent output to 100% output capacity of Excelpool System.
INDICATOR LED
• POWER: When illuminated, the Excelpool System has
input power.
• GENERATING: This LED is on steady during normal
operation. When flashing, the pool water is too hot or
cold to operate.
• SUPER CHLORINATE: Illuminates during Super
Chlorination. See description above.
• REMOTE CONTROLLED: The part is controlled by a
remote-control system.
• NO FLOW: When illuminated, the flow switch has
detected no flow and Excelpool System is NOT
generating chlorine. A flashing LED indicates that the
flow is restored, but there will be a 60 second delay
before generation is reestablished.
• CHECK SALT: When flashing, the salt level is low
(below 2500ppm) and Excelpool System is generating at
low efficiency. When illuminated steady, the salt level is
too low, and Excelpool System has shut down.
Note: Before adding large quantities of salt, it is advisable to
have your salt level professionally checked.
13| P a g e