Storing The Transducer; Maintenance; Important Notices - Humminbird ICE Flasher Series Installation Manual

Ice fishing transducer
Hide thumbs Also See for ICE Flasher Series:
Table of Contents

Advertisement

Available languages

Available languages

ICE FISHING TRANSDUCER Installation Guide

Storing the Transducer

When you are done fishing, store the transducer according to the control head installation guide instructions, using the following guidelines:
1a. If you have a Humminbird portable bag, wipe the cable dry, then unplug the cable from the jumper port and tuck the cable and the
transducer in the front pocket of the portable bag, under the control head. Make sure all the zippers on the portable bag are closed.
1b. If you have an ICE Flasher Series control head, wipe the cable dry, then tuck the float under the control head, wrap the cable around
the cable posts, and store the transducer in the transducer well in the front of the portable bag. You do not have to detach the
transducer cable from the control head.
2. Unplug the power cable when not in use.
CAUTION! Although the transducer cable is designed to be flexible in cold temperatures, you must store your cable correctly to
avoid stressing it. Make sure it is coiled smoothly, with no kinks, and that it is clear of the zippers on the portable bag.
If your transducer remains in the water for long periods of time, slush, algae and other marine growth can reduce the effectiveness of
the transducer. Periodically clean the face of the transducer with a mild, marine-safe and plastic-safe soap or solution.
If your transducer remains out of the water for a long period of time, it may take some time to wet the transducer after it is returned to
the water. Small air bubbles can cling to the surface of the transducer and interfere with proper operation. These bubbles will dissipate
with time, or you may wipe the face of the transducer with your fingers after the transducer is in the water.

Important Notices

WARNING! Disassembly and repair of this electronic unit should only be performed by authorized service personnel. Any modification of the
serial number or attempt to repair the original equipment or accessories by unauthorized individuals will void the warranty.
NOTE: Download Humminbird® installation guides and operations manuals from our Web site at humminbird.com.
NOTE: Product specifications and features are subject to change without notice.
ENVIRONMENTAL COMPLIANCE STATEMENT: It is the intention of Johnson Outdoors Marine Electronics, Inc. to be a responsible corporate citizen,
operating in compliance with known and applicable environmental regulations, and a good neighbor in the communities where we make or sell our
products.
WEEE DIRECTIVE: EU Directive 2002/96/EC "Waste of Electrical and Electronic Equipment Directive (WEEE)" impacts most distributors, sellers,
and manufacturers of consumer electronics in the European Union. The WEEE Directive requires the producer of consumer electronics to take
responsibility for the management of waste from their products to achieve environmentally responsible disposal during the product life cycle.
WEEE compliance may not be required in your location for electrical & electronic equipment (EEE), nor may it be required for EEE designed and
intended as fixed or temporary installation in transportation vehicles such as automobiles, aircraft, and boats. In some European Union member
states, these vehicles are considered outside of the scope of the Directive, and EEE for those applications can be considered excluded from the WEEE
Directive requirement.
This symbol (WEEE wheelie bin) on product indicates the product must not be disposed of with other household refuse. It must be disposed
of and collected for recycling and recovery of waste EEE. Johnson Outdoors Marine Electronics, Inc. will mark all EEE products in accordance
with the WEEE Directive. It is our goal to comply in the collection, treatment, recovery, and environmentally sound disposal of those products;
however, these requirements do vary within European Union member states. For more information about where you should dispose of your
waste equipment for recycling and recovery and/or your European Union member state requirements, please contact your dealer or distributor from
which your product was purchased.
© 2019 Johnson Outdoors Marine Electronics, Inc. All rights reserved.
OR...

Maintenance

5
532506-3_A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ice seriesIce helix chirp series

Table of Contents