DirecTV SWiM Installation Diagrams
  1. Manuals
  2. Brands
  3. DirecTV Manuals
  4. Switch
  5. SWiM
  6. Installation diagrams
DirecTV SWiM Installation Diagrams

DirecTV SWiM Installation Diagrams

Hide thumbs
Table of Contents

Advertisement

Quick Links

The information contained on these pages are confidential, proprietary DIRECTV business information and is intended for authorized users
only. Unauthorized use, disclosure or copying of this information is strictly prohibited and may be unlawful.

Advertisement

Table of Contents
loading

Related Manuals for DirecTV SWiM

Summary of Contents for DirecTV SWiM

  • Page 1 The information contained on these pages are confidential, proprietary DIRECTV business information and is intended for authorized users only. Unauthorized use, disclosure or copying of this information is strictly prohibited and may be unlawful.
  • Page 2 Port in Use: F connector with a weather seal. The connector must be torqued to 30in/lbs SWiM Switch port 2 out– The attached terminator must be used with a weather seal if the port is not in use. All other outside unused ports: Require a cap with a weather seal Using terminators or caps where not intended will result in service quality issues which may not be apparent at the time of install.
  • Page 3 Internal Wall Plate Represents a power inserter, the SWiM LNB Represents an Internal Wall Plate uses a 21vdc version and the SWiM module (switch) uses a 29vdc version. The SWiM port is color coded in RED Represents a Ground Block...
  • Page 4 Calculations To promote a better understanding of dB losses and dBm power within a DIRECTV installation, charts such as what is listed below are provided on each of the installation diagrams contained in this material. These charts will show a single path dB loss, a single path is defined as a single cable run from the ODU to a receivers tuner.
  • Page 5 974MHz frequency range. This could present itself as additional SWiM channel on the IRD’s signal screen. 1, Tuner 2 – is assigned SWiM Channel 2 See Slide 23 of the SWiM LNB & SWiM Module power point for more information regarding SWiM Channels IRD 2 Tuner 1 –...
  • Page 6 SWiM Integrated LNB Installation Compone nt Q TY Ne t Loss KaKu - F- Conne ctors HD DVR SWiM compatible IRD F-81 Barrels Single tuner SWiM compatible IRD SWiM SWS 4 11.0 4 way single port DC power passing Fe et of Cable splitter rated from 2-2150MHz BBC’s are not required in this scenario...
  • Page 7 SWiM Integrated LNB Installation KaKu - HD DVR SWiM compatible IRD Single tuner SWiM compatible IRD 4 way single port DC power passing splitter rated from 2-2150MHz BBC’s are not required in this scenario All Outdoor F-Connectors Weather Seal identifier...
  • Page 8 SWiM Integrated LNB Installation KaKu - HD DVR SWiM compatible IRD Single tuner SWiM compatible IRD Off-Air HD Antenna 4 way single port DC power passing splitter rated from 2-2150MHz BBC’s are not required in this scenario Weather Seal identifier...
  • Page 9 SWiM Integrated LNB Installation KaKu - HD DVR SWiM compatible IRD AM21 Off-Air Tuner Off-Air HD Antenna Single tuner SWiM compatible IRD 4 way single port DC power passing splitter rated from 2-2150MHz BBC’s are not required in this scenario...
  • Page 10 SWiM 5 Channel Switch Installation KaKu - 95° - 72.5° Single tuner SWiM compatible IRD HD DVR SWiM compatible IRD 4 way single port DC power passing splitter rated from 2-2150MHz Weather Seal identifier BBC’s are not required in this scenario 95°...
  • Page 11 SWiM 5 Channel Switch Installation KaKu - 95° Single tuner SWiM compatible IRD HD DVR SWiM compatible IRD 4 way single port DC power passing splitter rated from 2-2150MHz Weather Seal identifier BBC’s are not required in this scenario 95°...
  • Page 12 SWiM 5 Channel Switch Installation KaKu - 95° - 72.5° Single tuner SWiM compatible IRD HD DVR SWiM compatible IRD BBC’s are not required in this scenario Weather Seal identifier 95° Weather Cap on Unused Black or Blue Ground Wire...
  • Page 13 SWiM 5 Channel Switch Installation KaKu Weather Seal identifier Single tuner SWiM compatible IRD HD DVR SWiM compatible IRD 4 way single port DC power passing splitter rated from 2-2150MHz BBC’s are not required in this scenario Weather Cap on...
  • Page 14 SWiM 5 Channel Switch Installation KaKu - 95° - 72.5° HD DVR SWiM compatible IRD R-15 DVR IRD using SWiM Legacy ports 4 way single port DC power passing splitter rated from 2-2150MHz Weather Seal identifier BBC’s are not required in this scenario 95°...
  • Page 15 SWiM 5 Channel Switch Installation KaKu - HD DVR SWiM compatible IRD R-15 DVR IRD using SWiM Legacy ports Weather Seal identifier 4 way single port DC power passing splitter rated from 2-2150MHz BBC’s are not required in this scenario...
  • Page 16 SWiM 5 Channel Switch Installation KaKu - 95° HD DVR SWiM compatible IRD R-15 DVR IRD using SWiM Legacy ports 4 way single port DC power passing splitter rated from 2-2150MHz Weather Seal identifier BBC’s are not required in this scenario 95°...
  • Page 17 SWM 8 Channel Switch Installation KaKu - 95° - 72.5° Single tuner SWM compatible IRD HD DVR SWM compatible IRD 4 way single port DC power passing splitter rated from 2-2150MHz Weather Seal identifier BBC’s are not required in this scenerio 95°...
  • Page 18 SWiM 8 Channel Switch Installation KaKu - 95° Single tuner SWiM compatible IRD HD DVR SWiM compatible IRD 4 way single port DC power passing splitter rated from 2-2150MHz Weather Seal identifier BBC’s are not required in this scenario 95°...
  • Page 19 S-Video SWM- 120V “The following grounding diagrams illustrate only a few examples of ways to bond a DIRECTV system and may not meet bonding requirements in every municipality within the United States. It is the Internal responsibility of the installer/technician performing the installation to know and follow all local, state and federal grounding regulations within the area he or she is working.”...
  • Page 20 SWiM 8 Channel Switch Installation KaKu Weather Seal identifier Single tuner SWiM compatible IRD HD DVR SWiM compatible IRD 4 way single port DC power passing splitter rated from 2-2150MHz BBC’s are not required in this scenario Weather Cap on...
  • Page 21 SWiM 8 Channel Switch Installation KaKu - 95° - 72.5° HD DVR SWiM compatible IRD R-15 DVR IRD using SWiM Legacy ports 4 way single port DC power passing splitter rated from 2-2150MHz Weather Seal identifier BBC’s are not required in this scenario 95°...
  • Page 22 SWM 8 Channel Switch Installation KaKu - HD DVR SWM compatible IRD R-15 DVR IRD using SWM Legacy ports Weather Seal identifier 4 way single port DC power passing splitter rated from 2-2150MHz BBC’s are not required in this scenario Black Ground Wire Indicates # 17ga CCS Bond...
  • Page 23 SWiM 8 Channel Switch Installation KaKu - 95° HD DVR SWiM compatible IRD R-15 DVR IRD using SWiM Legacy ports 4 way single port DC power passing splitter rated from 2-2150MHz Weather Seal identifier BBC’s are not required in this scenario 95°...
  • Page 24 SWiM 8 Channel Switch Installation KaKu - HD DVR SWiM compatible IRD R-15 DVR IRD using SWiM Legacy ports 4 way single port DC power passing splitter rated from 2-2150MHz BBC’s are not required in this scenario Weather Seal identifier...
  • Page 25 SWiM 8 Channel Switch Installation KaKu Weather Seal identifier Single tuner SWiM compatible IRD HD DVR SWiM compatible IRD 4 way single port DC power passing splitter rated from 2-2150MHz BBC’s are not required in this scenario Weather Cap on...
  • Page 26 SWiM 8 Channel Switch Installation KaKu - 95° - 72.5° 4 Port Legacy Multiswitch Single tuner SWiM compatible IRD HD DVR SWiM compatible IRD R-15 DVR IRDs BBC’s are not required in this scenario Due to size of this drawing the below items...
  • Page 27 Single tuner SWiM compatible IRD HD DVR SWiM compatible IRD R-15 DVR IRDs BBC’s are not required for receivers connected to the SWiM 1 & SWiM 2 ports BBC’s are required on IRD’s connected to the 6x8 Multiswitch Weather Seal identifier Due to size of this drawing the below items 95°...
  • Page 28 HD DVR SWiM compatible IRD R-15 DVR IRD BBC’s are not required for receivers connected to the SWiM 1 & SWiM 2 ports Due to size of this drawing the below items Weather Seal identifier are not shown, all installations must include these items 95°...
  • Page 29 119° satellites are located and peaked for maximum signal strength. The SWM integrated LNB is connected to the ASL (SWiM IN port). This connection then allows the 101° and 119° satellite locations to be split into separate unique signals as seen below.
  • Page 30 1586 RGHT 3) Preset the antenna tilt and elevation to the settings obtained. Syst 4) Apply power to the SWiM LNB using the power inserter as the diagram LNB1 outlines. (When power is applied, and before any receivers are MENU connected, the SWiM Integrated LNB will enter a diagnostic mode that is required for the alignment procedure.)
  • Page 31 SWiM Integrated LNB Peaking: Note: Use instructions in the Meter Setup section for peaking of the SWiM- DO NOT CONNECT ANY IRD to the SWiM Integrated LNB BEFORE OR DURING THE PEAKING PROCESS 1) Be sure the mast is plumb and the foot plate is secure to an approved...
  • Page 32 BirDog Meter ASL Peaking SWiM Integrated LNB Peaking: DO NOT CONNECT ANY IRD to the SWiM Integrated LNB BEFORE OR DURING THE PEAKING PROCESS 1) Be sure the mast is plumb and the foot plate is secure to an approved mounting surface.
  • Page 33 BirDog Meter Splitter Peaking SWiM Integrated LNB Peaking: DO NOT CONNECT ANY IRD to the SWiM Integrated LNB BEFORE OR DURING THE PEAKING PROCESS 2-Way SWM 1) Be sure the mast is plumb and the foot plate is secure to an...
  • Page 34 Accutrac Pro Meter ASL Peaking SWiM Integrated LNB Peaking: DO NOT CONNECT ANY IRD to the SWiM Integrated LNB BEFORE OR DURING THE PEAKING PROCESS 1) Be sure the mast is plumb and the foot plate is secure to an approved mounting surface.
  • Page 35 Digisat III Meter ASL Peaking SWiM Integrated LNB Peaking: DO NOT CONNECT ANY IRD to the SWiM Integrated LNB BEFORE OR DURING THE PEAKING PROCESS 1) Be sure the mast is plumb and the foot plate is secure to an approved mounting surface.
  • Page 36 Accutrac III Meter ASL Peaking SWiM Integrated LNB Peaking: DO NOT CONNECT ANY IRD to the SWiM Integrated LNB BEFORE OR DURING THE PEAKING PROCESS 1) Be sure the mast is plumb and the foot plate is secure to an approved mounting surface.
  • Page 37 101° if connected to a SWiM splitter (4) Tighten the mast collar 119°. location. continue on with the instructions.
  • Page 38 Set Meter back to 101° - (3) Set the signal level. Super Buddy LNB 1 down the plastic dial to signal level zero (0) by BirDog DIRECTV SWM 101 Fine tune number. hand. adjustment Accutrac Pro Specific bolt (LNB 1, 13v w/o 22KHz ).
  • Page 39 (4) Using a ½ inch nut driver, rotate the Super Buddy LNB 1, fine tune adjustment bolt 2 full turns “counter clockwise.” BirDog DIRECTV SWM 101 Accutrac Specific (LNB 1, 13v w/o 22KHz ) (5) Record the signal Accutrac III – Satellite Select...
  • Page 40 # 13 – Check the IRD cable run, and redo if needed. Repeat step # 12. # 14 – Remove the IRD from the cable run. *Once you are done with the SWiM meter diagnosis of all the cable runs described in the following steps, plug in the cable to this first IRD.
  • Page 41 2150MHz for 8 channel SWiM-ODU. 4. LF error + 5 and 8 ch error, bad cable run. 5. LF error + 5 and 8 ch error + Voltage error, check to make sure power inserter is properly powering the SWiM-ODU. SWiM Installation...

Table of Contents