Step 1-4 Preparing Materials And Tools - Samsung AR TXHZ Series Installation Manual

Preparation

Step 1-4 Preparing materials and tools

Materials in the indoor unit package
Make sure that the indoor unit package contains the following
materials:
Mounting bracket (1)
**07*******
**09*******
**12*******
Remote control battery (2)
Quick guide (1)
Materials in the outdoor unit package
Make sure that the outdoor unit package contains the
following materials:
Rubber foot (4)
12 English
Remote control (1)
General information (1)
Installation manual (1)
Drain plug (1)
If using a multi system, refer to the manual
supplied with the outdoor unit.
Optional accessories
Insulated assembly pipe,
Ø 6.35 mm (1)
Pipe clamp B (3)
Drain Hose, 2 m long (1)
Vinyl tape (2)
Putty 100 g (1)
Cement nail (6)
3-wire Assembly Cable (1)
NOTE
• A flare nut is attached to the end of each refrigerant
pipe coming from the evaporator. Use these flare nuts
when connecting the pipes.
Insulated assembly pipe,
Ø 9.52 mm (1)
**09*******
**12*******
Pipe clamp A (3)
Foam Insulation (1)
PE T3 foam tube
insulation (1)
M4 x 25 tapped screw (6)
3-wire Power Cable (1)
2-wire Assembly Cable (1)