Work Area Safety - Genie S-65 TRAX Operator's Manual

Third Edition • Second Printing
Pictures in this manual may show a boom with
tires and wheels instead of tracks. All safety
information and operating instructions still apply to
the S-60 TRAX and S-65 TRAX, even if the picture
does not show the tracks.
Electrocution Hazards
applicable governmental regulations and the
following chart.
Line Voltage
0 to 50KV
50 to 200KV
200 to 350KV
350 to 500KV
500 to 750KV
750 to 1000KV
Part No. 227285
This machine is not
electrically insulated
and will not provide
protection from contact
with or proximity to
electrical current.
Maintain safe distances
from electrical power
lines and apparatus in
accordance with
Required Clearance
10 ft 3.0 m
15 ft 4.6 m
20 ft 6.1 m
25 ft 7.6 m
35 ft 10.6 m
45 ft 13.7 m
S-60 TRAX • S-65 TRAX
Allow for platform movement, electrical line sway or
sag and beware of strong or gusty winds.
Do not operate the machine during lightning or
storms.
Do not use the machine as a ground for welding.
Tip-over Hazards
Occupants, equipment and materials shall not
exceed the maximum platform capacity.
Maximum platform capacity
Maximum occupants
Operator's Manual

Work Area Safety

Keep away from the
machine if it contacts
energized power lines.
Personnel on the
ground or in the
platform must not touch
or operate the machine
until energized power
lines are shut off.
500 lbs 227 kg
2
9