Table of Contents
Advertisement
Instructions to remove the TruVision 360°
camera cover
To remove the TruVision 360° camera cover:
1.
Open the small flap on the camera cover. Using the hex wrench provided,
loosen the small screw.
2.
Two clips on the cover ring lock it on to the camera base.
Using a flathead screwdriver, release the two clips on the base of the
camera to detach the cover.
3.
Grasp the opening on the side of the cover (1), and pull the cover and base
apart to open the camera.
A.
B.
12
Installation Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the TruVision 12MP and is the answer not in the manual?