Fig 97. Lift Cylinder Lower Down Valve
11. Thread a 125mm long M8-1.25 capscrew into the manual
operator of the lift/lower section on the proportional
control valve (first section from boom side, on top of the
valve) and use it to manually operate the valve to lower
the boom. Be aware of lowering the boom to avoid pinch
points and crushing hazards.
Fig 98. Lift/Lower Sections of Proportional Valve
12. When the boom is fully lowered, tighten the valve with
hex wrench, then tighten the nut to secure valve.
ON TOP
Do Not Operate Tags
69
XR5519
Operation Manual