Transmission Range Selector Switch; Light Switches; Turn Signal Switch; Hazard Switch - Xtreme Manufacturing Snorkel XR5519 Operator's Manual

XR5519

Transmission Range Selector Switch

Select the desired mode by pushing the top of this switch to
engage the High Range (rabbit), or the bottom to select the
Low Range (turtle).
The Low Range mode is used for climbing steep grades, or
whenever slow speed is desired. The High Range mode adapts
to driving conditions and allows for higher speed travel.
Fig 53. Transmission Range Selector Switch

Light Switches

The Light Switches control the boom and cab lights. Their
status can be monitored within the Steering Cluster in the
Main Switch cluster screen. This screen is accessed from the
Settings screen, touching the CAN Switches button.
Fig 54. Light Switches
If equipped with this option, the Strobe Light Switch turns on
ans off the strobe light mounted on top of the ROPS/FOPS cab.
Operation Manual
Fig 55. Strobe Light Switch
Turn Signal Switch (Optional)
If available, the Turn Signal Switch controls the turn signals
(left or right).
Fig 56. Turn Signal Switches (Left and Right)
Hazard Switch (Optional)
The optional Hazard Light Switch flashes all four (4) turn
signals).
Fig 57. Hazard Switch
42
Operator Cab