Table of Contents
Advertisement
XR5519
Pre-Operation Inspection Checklist
Walk around the ENTIRE forklift while visually performing the pre-operation inspection.
Check that "Do Not Operate" tags have not been placed on the forklift.
Check that load capacity charts are legible.
Check condition and operation of the seat belt and mounting hardware.
Check that Operation and Safety Manual is in the protective case and legible.
Check forks for welds, cracks, misalignment, or any other damage.
Check that carriage fork pins are straight and in place to prevent forks from changing position or coming o the carriage.
Check all hydraulic hoses and hose connections for wear or leaks.
Check tilt cylinder for leaks or any other damage
Check boom for straightness or any other damage.
Check all four (4) tires and wheels for:
Punctures, cracks, cuts, gouges, bulges, foreign objects, or any other damage to tires.
Loose or missing lug nuts.
Bent anges or any other damage to rims.
Low tires.
Check mirrors for cracks, cleanliness, and proper adjustment.
Check hydraulic reservoir for proper uid level. Add hydraulic uid, if necessary.
Check engine compartment for:
Loose or damaged belts, hoses, and radiator fan blades.
Coolant reservoir level. Add radiator coolant, if necessary.
Engine oil level. Add engine oil, if necessary.
Check electrical wires and connectors.
Check front and rear axles for leaks or any other damage.
Check boom lift and carriage tilt cylinders and hydraulic lines for leaks or any other damage.
Check battery terminals for corrosion.
Check battery for cracked, melted, or damaged case.
Check that all labels are present and legible. Replace any damaged or illegible labels.
Check that operator's cab is empty of all trash, debris, or any loose items.
Check that pedals, and non-skid surfaces are clean and free of grease, oil, dirt, snow, or ice.
Date: __________________________
Operation Manual
.
.
Initials: __________________________
48
Operation
Advertisement
Table of Contents
