Table of Contents
Advertisement
The pantherCCS can be mounted on a flat surface using (4) bolts or studs. Bolt holes are provided in the pantherCCS
housing that allow the unit to be secured to the selected mounting location using bolts or mounting studs.
Mounting and Overall Dimensions
6.50
3.780
WIRING
Mounting Hardware (not provided)
(4) 1/4 X 1-1/ 2 inch bolts or studs
(4) flat washers
(4) lock washers
(4) nuts
Note: Flat washers are required for assembly against plastic housing
Do not install unit on a flat, horizontal surface. If installed improperly, wet weather
may cause water to pool in the microphone port, decreasing performance.
INSTALLATION
3.780
WARNING
Safety Information
Unit must be installed at an angle of 45 degrees or more.
2.50
MOUNTING HARDWARE: 1/4 INCH.
NUT/LOCK WASHER/FLAT WASHER
MAX. TORQUE 85 IN-LBS.
(4) PLACES
FLAT PLATE
W/ STUDS
1.50
5
Advertisement
Table of Contents
