Advance Settings; Dial Mode; Flash Time - Philips DECT7272S/05 User Manual

Dial Mode*

To change the dial mode
By default your phone is pre-configured with the country dependent settings and you do not
have to change them.
Press to reach the menu list.
Scroll to Adv. Settings and press
Press to select Dial Mode.
Browse to select Tone or Pulse and press
Note : This setting allows you to select pulse dialling (also called "Loop disconnect" which is used in
countries without DTMF tone dialling capability or when using old PABX).

Flash Time*

To change the flash time
This setting is useful when using operator services.
Press to reach the menu list.
Scroll to Adv. Settings and press
Scroll to Flash Time and press
Browse to select Short or Medium or Long and press
Note : The use of some operator services accessed with
waiting, call forward ...) will depend on the flash setting according to your installation type (ISDN, Public,
PABX).
Adv. Settings
Dial Mode
Flash Time
Voice Lang.
Security
Registration
Unregistration
Reset
Advanced Settings
SELECT.
SELECT.
SELECT.
SELECT.
+ ,
SELECT.
+ and +
*Country dependent feature
(call
43