Sms; Write And Send New Sms - Philips DECT7272S/05 User Manual

SMS

SMS stands for Short Message Service.To benefit from this service you must subscribe to the
Caller Line Identification Service (CLI) together with the SMS service from your network
provider. SMS can be exchanged with a phone (mobile or compatible fixed lines), a fax or an
Email address provided the receiver has also subscribed to the CLI & SMS services.
Your DECT 723/727 factory settings correspond to the main national operator. If you
wish to send or receive SMS through another service provider you must set the
corresponding numbers (see page 25 and the SMS leaflet).

Write and send new SMS

To write and send an SMS to a phone or a fax*
Press to reach the menu list and press
Select Write a SMS option and press
Select SMS or scroll
Enter the text and press
Note : To delete a wrong character press
character by simply moving the cursor to the left
character and pressing
If you enter more than 640 characters for an SMS or a Fax you will hear an error beep.
Enter the phone number and press
scroll to retrieve the number from the Phonebook list (to send SMS from
phonebook, see page 28).
Select Send, otherwise
if you want to store your SMS, scroll to Save as Draft and press
The SMS stored can be later retrieved from Draft folder.
The sent SMS can be up to a maximum of 640 characters long.The DECT 723/727 can store 20
SMS messages of 160 characters each in the draft folder and in the Outbox.
*Country dependent feature
Write a SMS
Inbox
Outbox
Draft
SMS settings
Default Center
to Fax* and press
OK (see page 18).
CLEAR once.
SMS
Important informations are also
available on the SMS leaflet in the box
SELECT.
SELECT.
SELECT.
CLEAR.You can delete and change any
or to the right
OK or press LSK
to reach the
PHBK and
SELECT.
19