Configuration mode
Before using your DECT 723/727, you need to configure it according to the country of use.
Install the batteries. After a few minutes of charging, the configuration screen appears.
Browse
through the different countries.
Press
SELECT to choose the country that suits you.
Browse
through the list of operators.
Press
SELECT to choose your operator.
Your phone is ready to be used.
If you need to re-configurate your DECT 723/727, see page 38.
Note: If
BACK is pressed, the handset will show the country selection screen again.
Handset power OFF and ON
To power OFF or ON the handset long press the
Keypad lock/unlock
Long press the
14
Configuration mode / Handset power OFF/ON & keypad lock/unlock
key to lock/unlock the keypad in idle mode.
Country dependent feature
key.