Table of Contents
Advertisement
Get started
1� Connect each end of the line cord to the telephone socket
at the back of the unit and the telephone socket on the wall.
Install the supplied two batteries correctly.
2� Connect the coil cord to the base and handset.
3� Install this product in a cool, dry and well-ventilated area
away from corrosive gas.
-5-
Phone settings
Note: When the phone is idle, press
mode, the LCD displays
setting menu, and press
to enter the setting� When the
setting is completed, press
the next setting menu. Press to exit the Settings mode. If no
operation is executed within about 7 seconds, the phone will
automatically exit the Settings mode.
1.
Set date/time
to enter the Settings mode, the LCD displays
Press
again to enter the date/time setting menu, the year
Press
display flashes. Press
or
move to the month (M) setting. In the same way, you can set
the date, hour and minute display in sequence.
(Note: When the incoming call uses FSK signal, time of the
call will be updated automatically; if it uses DTMF signal, time
won't be changed.)
2.
Set local area code
Press
to enter the Settings mode� Scroll to
to enter local area code setting menu, the LCD displays
to set the code, the first "-" flashes (if the
� Press
local area code has been set, it will be displayed and its first
digit flashes). Press
to set or change the first digit to 0-9.
or
to move to the second digit and set it. After all digits
Press
are finished, press
to confirm the setting. (up to 5 digits can
be set)
to enter the Settings
to scroll to a
� Press
or
to save the setting and enter
to set the year. Then press
� Press
-6-
�
to
Advertisement
Table of Contents
