Philips DECT7272S/05 User Manual page 51

+
Press or
-
to switch between outgoing message 1 or 2.
The current outgoing message number will be shown inside the icon
Press to confirm the selected outgoing message
setting / ok
and then proceed to the next setting.
Note : If you do not wish to change the outgoing message type, press
Sequence 2 :To set the number of rings before answering
You can set the answer machine to start playing the outgoing message after a given number of
rings (1 - 7 rings or Economy mode
using the remote access.The answer machine will start playing the outgoing message after 3 rings
if there are new messages. If there is no new message, the outgoing message will be played after 5
rings. Hang up after the 4th ring if you want to check if you have any messages at no cost.
After having confirmed the outgoing message type (see above), you may select ring delay.
The ring delay icon
+
Press or
-
to select the wanted ring delay : 1, 2, 3, 4, 5, 6, 7 or $ (economy mode).
The currently selected number of ring delays will be shown inside the icon
Press to confirm the selected number of ring delays
setting / ok
and then proceed to the next setting.
Note : If you do not wish to change the number of rings before answering, press
station).
Sequence 3 :To activate / deactivate call screening on the base
You can activate or deactivate the call screening on the base loudspeaker, i.e. choose whether you
want to hear the message being left by your callers or not. By default the function is activated.
After having confirmed the number of ring delays (see above), you may select
call screening ON or OFF.
The loudspeaker icon
+
Press or
-
to select call screening ON or OFF.
If call screening OFF has been selected the loudspeaker icon will be crossed
Press to confirm the selected call screening setting
setting / ok
and then proceed to the next setting.
Note : If you do not wish to change the call screening setting, press
$
).The economy mode (activated by default) is useful when
will flash and all other icons except power
will flash and all other icons except power
Answer machine DECT 727
.
(key on the base station).
setting / ok
will be cleared.
.
(key on the base
setting / ok
will be cleared.
.
(key on the base station).
setting / ok
51