Configure Your Phone (Country Dependent); What Is Standby Mode; Display Icons - Philips M110W/FR User Manual

Configure your phone
(country dependent)
1
When using your phone for the first time,
you see a welcome message.
2
Press MENU/OK.
Set the country/language
Select your country/language, then press
MENU/OK to confirm.
» The country/language setting is saved.
Note
•
The country/language setting option is country
dependent. If no welcome message is displayed, it
means the country/language setting is preset for your
country. Then you can set the date and time.
To reset the language, see the following steps.
1
Select MENU/OK > [Phone setup] >
[Language], then press MENU/OK to
confirm.
2
Select a language, then press MENU/OK
to confirm.
» The setting is saved.
Set the date and time
1
Press MENU/OK.
2
Select [Phone setup] > [Date & time],
then press MENU/OK to confirm.
3
Pick up the handset.
4
Press the numeric buttons to enter the
date, then press MENU/OK to confirm.
» The time setting menu is displayed.
5
Press the numeric buttons to enter the
time.
• If the time is in 12-hour format, press
to select [am] or [pm] (Country
/
dependent).
6
Press MENU/OK to confirm.
Your phone is now ready to use.

What is standby mode?

Your phone is in standby mode when it is idle.
The date and time are displayed on the standby
screen.

Display icons

In standby mode, the icons shown on the
screen tell you what features are available.
Icon Descriptions
It is on when there is no battery.
It flashes when the battery level is low.
It remains steadily on when browsing
answered incoming calls in the call log.
It indicates an outgoing call in the redial
list.
It flashes when there is a new missed call
or when browsing the unread missed
calls in call log.
It remains steadily on when browsing the
read missed calls in call log.
It flashes when receiving incoming call.
It remains steadily on when you are in
a call.
The speaker is on.
The ringer is off.
It is on when the microphone is muted.
It flashes when there is a new voice
message.
It remains steadily on when the voice
messages are already viewed in the call
log.
The icon is not shown when there is no
voice message.
It is displayed when you scroll up / down
/
a list or increase / decrease the volume.
EN
7