Table of Contents
Advertisement
When the emergency stop button is pressed down, the system will cut off all power
supplies (such as motor power and laser power). If it is necessary to turn off the power
of the machine, turn off the master power switch or unplug the mains cable.
The emergency situations must have been eliminated and all defects have been corrected
Attention
or failures have been repaired before releasing the emergency stop or continuing to
operate the machine.
When the emergency situations have been eliminated, turn the depressed emergency
stop button clockwise to let it pop up and reset naturally to release the emergency stop
Tips
state.
After the emergency stop state is released, the software must be restarted before the
equipment restoring normal work.
3.2.3 Monochromatic warning lamp (optional)
Monochromatic warning lamp turns red in normal processing.
33
Figure 3-22
Monochromatic Warning Lamp
Hide quick links:
Advertisement
Table of Contents
