Unpacking Check; Preparations For Equipment Installation - Yueming CMA0604-B-A Product Operation Manual

3.1.3

Unpacking check

Check on the equipment and auxiliary parts after unpacking is required to ensure them free of failure caused
during transportation. Items to check are as below:
 Check in equipment appearance
Please make sure that the equipment is free of scratch, damage, distortion and corrosion by
appearance.
 Check on equipment case
Remove the upper, left and right cover to make sure that the equipment is free of parts or cable caused
by poor contact or internal damage.
 Check on equipment parts and auxiliary parts
 Open the auxiliary case to verify parts following the packing list and check if there is damaged accessory
or accessory with distortion.
Attention
Attention
3.1.4

Preparations for equipment installation

Preparations for installation are as below:
 Installation site

Preparation of power supply
The normal operating voltage of the equipment is 220-240V AC, 50/60Hz, and an extension socket with
circuit breaker or overcurrent protection device should be connected. It is strictly prohibited to turn on the
machine when the grid voltage is instable or does not match.

Preparation of cooling water
To ensure the life of the laser generator, it is recommended to use distilled water as the cooling water

Preparation of air supply
Air pump or air compressor, air pressure: 86-106kpa.

The laser equipment has requirements on site conditions and work environment. Please check whether the
venue is appropriate according to the relevant requirements of 1.3 and our company.

The dimensions of CMA1309-B-A are 1905×1705×1320mm. To ensure normal use of the machine, the
working space of the machine must be at least 2905X2705X2000mm. The workspace is for reference. The
specific size depends on the site;
20
If unpacking by user is needed, prior consent from our after-sales personnel or
salesman is required. Otherwise, our company shall not be liable for any accidents
caused.
In case of the problems above found after unpacking, please timely notify our
after-sales personnel or salesman, or directly contact our company.
Unauthorized disposal is prohibited.