Locate via DP750 Base station
1. On DP750 Base station back side, press Radio/Page button
2. All registered handsets will receive paging call, once located, you can terminate the paging calling
by pressing any key on the handsets or the radio/page button again.
Checking System Status
You can view the system status on your handset including the following information of the system:
Item
Model
Firmware
Hardware
IPEI
DECT Region
IP Address
Subnet Mask
Gateway
MAC address
To check the handset status:
1. Press Menu (left softkey
EU
Figure 13: Locate Handset via Web UI
Table 9: DP720 Info description
Description
Product model info
DP720
.
Current firmware version installed on DP720. i.e.: 1.0.1.14
Hardware version of DP720. i.e.: 1.4A
International Portable Equipment Identifier.
Unique "serial number" for DECT handsets.
Region of DECT. i.e. EU or US
IP address of the base station DP750 if registered.
Subnet Mask of the base station DP750 if registered.
Gateway IP of the base station DP750 if registered.
MAC address of the base station DP750 if registered.
or the selection key
DP750/DP720 User Guide
.
) to bring up operation menu.
P a g e
| 33