Restore Factory Default Settings; Resetting The Dp750 Base Station; Via Reset Button; Via Web Gui - Grandstream Networks DP750 Administration Manual

RESTORE FACTORY DEFAULT SETTINGS

Warning:
Restoring the Factory Default Settings will delete all configuration information on the phone. Please backup
or print all the settings before you restore to the factory default settings. Grandstream is not responsible for
restoring lost parameters and cannot connect your device to your VoIP service provider.

Resetting the DP750 Base Station

There are two methods to reset your base station to the default setting:

Via Reset Button

1. Locate the reset hole on the back panel of your DP750.
2. Insert a pin in this hole, and press for about 7 seconds.
3. Take out the pin. The unit will restart automatically with parameters restored to default values.
Note: A quick press on the reset hole will just reboot the unit.

Via Web GUI

1. Access DP750 Web GUI (default username and password are: admin/admin).
2. Navigate to Maintenance  Factory Reset.
3. Select the Reset Type from the reset drop down list.
4. Press Reset button and the unit will prompt a confirmation message, press OK to reset, then the
unit restart automatically with parameters restored to default values or press Cancel to annul the
reset.

Resetting the DP720 Handset

Please follow the instructions below to reset the DP720 Handset:
1. Press "Menu" (left softkey
2. Press arrow keys to move the cursor to Settings and then press "Select".
3. Navigate to System Settings  Factory Reset, a warning window will pop out to make sure a
reset is requested and confirmed;
or the selection key ) to bring up operation menu.
DP750/DP720 Administration Guide
Version 1.0.11.4
P a g e | 108