Dect Page Definitions; Table 11: Dect Page Definitions - Grandstream Networks DP750 Administration Manual

Delay preconfigured number. The range is 0 to 60 seconds.
Enable Call Enables do not disturb, call forward and other call features via the local feature
Features codes on the base. Otherwise, ITSP feature codes can be used.
Default is Yes.
Disable Call Waiting Disables displaying caller ID when receiving a second incoming call.
Caller ID Default is No.
Enable Call Waiting Enables call waiting for accounts using this profile which are set to Parallel ring
in Parallel Mode mode. Default is No.
Disable Visual MWI Disables use of visual message waiting indicator when there is an unread voicemail
message. Default is No.
Transfers the call to the other party if the conference initiator hangs up.
Transfer on
Conference Hang-up Default is No.
Stops ringing when incoming call is not answered within a specific period of time.
Ring Timeout
Default is 60 seconds.
Forwards incoming call to the next member of a hunt group if not answered within
Hunting Group Ring
Timeout a specific period of time. Default is 20 seconds.
Send Anonymous Sets "From", "Privacy" and "P_Asserted_Identity" headers in outgoing INVITE
message to "anonymous", blocking caller ID. Default is No.
Anonymous Call Rejects incoming calls with anonymous caller ID with "486 Busy here" message.
Rejection Default is No.
Special Feature Selects Soft switch vendors' special mode. Example of vendors: Broadsoft,
CBCOM, RNK, Huawei, ZTE IME, Phone Power, Metaswitch.
Default is Standard.
Music On Hold URI Configure the music On Hold URI to call when a call is on hold if server support it.
Allow Unsolicited Allow unsolicited REFER to accomplish an outgoing call.
REFER

DECT Page Definitions

General Settings
Base Station Name Displays the name of the base station. Default is
address].

Table 11: DECT Page Definitions

DP750/DP720 Administration Guide
Version 1.0.11.4
DP750[last 6 digits of MAC
P a g e | 56