Change The Dial Mode (Country-Dependent); Set First Ring Detection; Default Settings - Philips SE6554B/05 User Manual

7.12 Change the Dial Mode
(country-dependent)
The default value for dial mode that is
preset in your handset should be the best
suited for your country network and
therefore you should not need to change
it.
Press m in idle mode, scroll n to
Advanced Set, and press o
Select.
Scroll n to Dial Mode and press
o Select.
Scroll n to Tone or Pulse and
press o Select to confirm.
• A validation tone is emitted and
the screen returns to the
Advanced Set menu.
7.13

Set First Ring Detection

First ring detection allows the phone to
ring upon reception of the first ring
signal. It is recommended that you set
first ring detection Off if you subscribe
to caller line identification service.
(When using personalized phonebook
melodies, this will prevent a normal ring
tone from sounding before a melody
starts playing.) If you do not subscribe to
caller line identification service, it is
recommended that you set first ring
detection On. (See Section 5.6.4.)
Press m in idle mode, scroll n to
Advanced Set, and press o
Select.
Scroll n to First Ring and press
o Select.
Scroll n to On or Off and press
o Select to confirm.
Advanced settings
• A validation tone is emitted and
the screen returns to the
Advanced Set menu.
Note
The default setting for first ring detection
is country dependent. In countries where
the default setting is On, the setting
automatically switches to Off when you
receive a call containing caller line
identification. However, this occurs only
if you do not first manually change the
setting. (It does not change automatically
if you manually change the first ring
setting even once.)
7.14

Default Settings

Parameter Default Value
Ring Volume Level 3
Ring Tone Ring 1
Earpiece Level 3
Volume
Speaker Level 3
Volume
Key Beep On
Display Country group
Language dependent
Wallpaper Wallpaper 1
Color Color 1
Theme
Display Level 3
Contrast
Backlight 20 Seconds
Time
Auto Hang- On
Up
Handset Philips
Name
45