Table of Contents
Advertisement
8.6
Set prefix
This feature allows you to define a prefix
number to be added to the beginning of a
number during predialling (see
"Predialling" on chapter 4.1.1). You may
also use this feature to add a detect string
to match and replace the first few digits of
the number during predialling.
You can enter up to a maximum of 5
digits for the detect string and auto prefix
number respectively.
m
1
Press
:
to
ADVANCED SET
<
, scroll
OK
<
press
OK
2
DETECT DIGIT
screen. Press
• The last stored detect string is
displayed (if any).
3
Enter a detect string number
(maximum 5 digits) and press
to confirm.
4
is displayed on the screen.
PREFIX
<
Press
OK
• The last stored prefix number is
displayed (if any).
5
Enter the prefix number (maximum
10 digits) and press
• A validation tone is emitted and the
screen returns to previous menu.
Note
If no detect string (blank) is entered, the
prefix number will be automatically added
to the predial number after
pressed.
For numbers starting with *, # or P, the
prefix number will not be added to the
predial number after
Advanced settings
key in idle mode, scroll
and press
:
to
PREFIX
.
is displayed on the
<
to enter.
OK
<
to enter.
<
to confirm.
OK
r
key is
r
key is pressed.
8.7
Change recall time
Recall time (or dial delay) is the time delay
by which the line will be disconnected
after you press
short, medium or long.
The default value of recall time that is preset
in your handset should be the best suited
for your country network and therefore
you should not need to change it.
1
Press
:
<
and press
2
Scroll
and
LONG
• A validation tone is emitted and the
8.8
Change the dial mode
The default value for dial mode that is
preset in your handset should be the best
OK
suited for your country network and
therefore you should not need to change it.
There are two dial modes: Tone or Pulse.
1
Press
:
<
and press
2
Scroll
press
• A validation tone is emitted and the
8.9
Set first ring
When this function is set to Off, the first
ring from a voice call will not sound. This is
particularly useful in countries where calling
line identity is sent after the first ring.
1
Press
to
r
key. It can be set to
m
key in idle mode, scroll
to
ADVANCED SET
:
, scroll
to
OK
<
.
OK
:
to
SHORT
<
and press
screen returns to previous menu.
m
key in idle mode, scroll
to
ADVANCED SET
:
, scroll
to
OK
<
.
OK
:
to
TONE
<
to confirm.
OK
screen returns to previous menu.
m
in idle mode, scroll
ADVANCED SET
and press
RECALL TIME
,
or
MEDIUM
to confirm.
OK
and press
DIAL MODE
or
and
PULSE
:
and press
31
Hide quick links:
Advertisement
Table of Contents
