Table of Contents
Advertisement
Press m in idle mode, scroll n to
Advanced Set and press o
Select.
Scroll n to Reset and press o
Select.
Reset? is displayed on the screen.
Press o OK to confirm.
• A validation tone is emitted.
• The unit is reset to its default
settings. (See section 7.14
below.)
7.10
Set Auto Prefix
This feature allows you to define a prefix
number to be added to the beginning of a
number during predialling (see
"Predialling" - section 4.1.1). You may
also use this feature to add a detect
string to match and replace the first few
digits of the number during predialing.
You can enter up to a maximum of 5
digits for the detect string and 10 digits
for the auto prefix number.
Press m in idle mode, scroll n to
Advanced Set and press o
Select.
Scroll n to Auto Prefix and press
o Select.
Detect Digit: is displayed on the
screen. Enter a detect string
number (maximum 5 digits) and
press o OK to confirm.
Prefix: is displayed on the screen.
Enter the prefix number (maximum
10 digits) and press o OK to
confirm.
44
• A validation tone is emitted and
the screen returns to the
Advanced Set menu.
Note
If no detect string (blank) is entered, the
prefix number will be automatically
added to the predial number after t is
pressed.
For numbers starting with *, # or P, the
prefix number will not be added to the
predial number after t is pressed.
7.11
Change Recall time
Recall time is the time delay by which the
line will be disconnected after you press
the t key. It can be set to short or
long.
The default value of recall time that is
preset in your handset should be the best
suited for your country network and
therefore you should not need to change
it.
Press m in idle mode, scroll n to
Advanced Set, and press o
Select.
Scroll n to Recall Time. and
press o Select.
Scroll n to Short or Long and
press o Select to confirm.
• A validation tone is emitted and
the screen returns to the
Advanced Set menu.
Note
The use of your SE655 cannot be
guaranteed on all PABX.
Advanced settings
Advertisement
Table of Contents
