Table of Contents
Advertisement
procedures are covered below. There is
also a menu to set the answering
machine options.
The telephone answering machine is ON
by default. To switch the answering
machine between on and off, press e
on your base station. Alternatively, you
may switch the answering machine on
and off via your handset (see section
10.6.2).
10.1
Playing Messages
10.1.1 Playback of messages via
handset
The answering machine message counter
blinks when there are new messages and
display the number of new messages. The
first recorded message is played first via
the loudspeaker. When all new messages
have been played, the answering machine
will stop and the message counter will
stop blinking.
Press the m key in idle mode,
scroll n to Answer Machine, and
press o Select.
Play is highlighted. Press o
Select to start playing new
messages.
• The handset displays New and
the number of new messages in
the format 01/04, where 01 is
the number of the message being
played and 04 is the number of
new messages.
• If there are no new messages, the
handset displays the number of
58
old messages in the same format
(however 'New' is not displayed.)
and plays the old messages.
10.1.2 Functions available during
playback
During playback, you can enable the
following functions by pressing o
Menu. Use n to scroll between the
functions and press o Select to
confirm.
Repeat
Replay the current
message
Next
Listen to the next
message.
Previous
Listen to the previous
message.
Delete
Delete the message
currently playing.
10.2
Delete all messages
Warning
Deleted messages cannot be recovered.
Note
Unplayed messages will not be deleted.
Press the m key in idle mode,
scroll n to Answer Machine, and
press o Select.
Scroll n to Delete All and press
o Select.
Delete All? is displayed on the
screen. Press o OK to confirm
deletion of all your messages.
• Waiting... is displayed while the
messages are deleted; then,
Deleted is displayed for 2
Telephone answering machine (TAM)
Advertisement
Table of Contents
