Advanced Settings; Recall Time; Dial Mode; Temporarily Switch From Pulse To - Philips SE4451S/05 User Manual

9

Advanced settings

This setting is useful to access certain network
and PABX/switchboard services.
9.1

Recall time

The default SE445 recall time is suitable for your
country and network operator. It is unlikely that
you should need to change this setting unless
advised to do so.
m
Press , scroll
1
m
press .
RECALL TIME is displayed. Press
2
u d
Press or
3
want: SHORT, MEDIUM, LONG.
m
Press to confirm.
4
e
Press to return to standby.
5
Note
n
The use of your SE445 cannot be guaranteed on
all PABX.
9.2

Dial mode

The default SE445 dialling mode is suitable for
your country and network operator. It is unlikely
that you should need to change this setting
unless advised to do so.
m
Press , scroll
1
m
press .
d
Scroll to DIAL MODE. Press
2
u d
Press or
3
m
Press to confirm.
4
e
Press to return to standby.
5
9.2.1

Temporarily switch from Pulse to

Tone dialling

Press and hold
1
The dial mode will change from Pulse to Tone
for the duration of the call.
22
d
to ADVANCED SET and
m
to select the setting you
d
to ADVANCED SET and
m
to select TONE or PULSE.
*
.
9.3
Prevent certain numbers from being dialled from
your SE445. Store up to four specific numbers,
each up to 4 digits – for example, international
or local prefixes.
Bypass call barring by switching the setting Off
or On.
Note
n
If you switch Call barring on, BARR MODE ON will
be displayed on your screen in standby mode.
9.3.1
.
Press
1
press
Scroll
2
Enter the master PIN (default setting 0000)
3
and press
MODE is displayed. Press
4
Press
5
Press
Press
6
set the number (See below).
9.3.2
Press
1
press
Scroll
2
Enter the master PIN (default setting 0000)
3
and press
Scroll
4
If necessary, scroll
5
.
available slot.
Press
6
you want to bar. Press
Press
7
9.4
When activated, this feature allows you to dial
a number by pressing any key on your handset
(except
access to emergency services.

Call barring

Switch call barring on/off

m d
, scroll to ADVANCED SET and
m
.
d
to CALL BARRING. Press
m
.
u d
or to select ON or OFF.
m
to confirm.
e
to return to standby. You can now

Set a number to be barred

m d
, scroll to ADVANCED SET and
m
.
d
to CALL BARRING. Press
m
.
d
to NUMBER. Press
u
m
and enter the number or prefix
m
e
to return to standby.

Baby call

e
). This feature is very useful for
m
.
m
.
m
.
m
.
d
or to the next
to confirm.
Advanced settings