Operating Instructions - Leister UNIROOF E 40 mm Operating Instructions Manual

GB
USA
Please read operating instructions carefully before use
and keep for future reference.
Leister UNIROOF E
Hot Air welder
Application
• Overlap welding of roof sheeting made of PVC, TPO, ECB, EPDM and CSPE on areas close to edges.
• Overlap welding of sheets and coated fabric.
• Welding seam width 40 mm (1.6 inch).
10

Operating Instructions

Warning
Danger ! Unplug the tool before opening it, as live components and connections
are exposed.
Incorrect use of hot-air tools can present a fire and explosion hazard, particularly
in the proximity of flammable materials and explosive gases.
Danger of getting burned ! Do not touch the end of the heater tube and nozzle
when they are hot. Let the tool cool down. Do not point the hot-air flow in the
direction of people or animals.
Connect tool to a receptacle with protective earth terminal. Any disconnection
of the protective conductor in or outside the tool is dangerous!
Use extension cord with protective conductor only.
Caution
The rated voltage stated on the tool must correspond with the mains voltage.
230
EN 61000-3-11; Z
120
authority.
For personal protection we strongly recommend the tool to be connected to an RCCB
FI
(Residual Current Circuit Breaker) before using it on construction sites.
Gerät muss beobachtet betrieben werden.
Wärme kann zu brennbaren Materialien gelangen, die sich ausser Sichtweite
Gerät darf nur von ausgebildeten Fachleuten oder unter deren
befinden.
Aufsicht benützt werden. Kindern ist die Benützung gänzlich untersagt.
Protect the tool from damp and wet.
(Translation of the original operating instructions)
= 0.139 + j 0.087 . If necessary, consultate supply
max