Viavi T-BERD 5800 Testing Manual page 9

5. Load Test
6. All Test
7. Select Test
If a shortcut for this test is stored on the T-BERD, use the Test List to launch the
test and proceed to Section 3.3.
If the Select Test menu is hidden, tap
In the Select Test menu,
choose one of the following:
 For 10BASE-T, 100BASE-T, or 1000BASE-T Electrical Ethernet testing:
Ethernet►10/100/1000►RFC 2544►L3 Traffic IPv4►Terminate or
Ethernet►10/100/1000►RFC 2544►L3 Traffic IPv4►P1 Terminate.
 For 100BASE-FX Optical Fast Ethernet testing:
Ethernet►100M Optical►RFC 2544►L3 Traffic IPv4►Terminate or
Ethernet►100M Optical►RFC 2544►L3 Traffic IPv4►P1 Terminate.
 For 1000BASE-SR, 1000BASE-LR, or other GigE Optical Testing:
Ethernet►1GigE Optical►RFC 2544►L3 Traffic IPv4►Terminate or
Ethernet►1GigE Optical►RFC 2544►L3 Traffic IPv4►P1 Terminate.
 For 10GBASE-SR, 10GBASE-LR, other 10GigE Optical Testing:
Ethernet►10GigE LAN►RFC 2544►L3 Traffic IPv4►Terminate or
Ethernet►10GigE LAN►RFC 2544►L3 Traffic IPv4►P1 Terminate.
 For 40GBASE-SR4, 40GBASE-LR4, or other 40GigE Optical Testing:
Ethernet►40GigE► RFC 2544 ►L3 Traffic IPv4►Terminate or
Ethernet►40GigE► RFC 2544 ►L3 Traffic IPv4►P1 Terminate.

For 100GBASE-SR10, 100GBASE-LR4, or other 100GigE Testing:
Ethernet►10GigE► RFC 2544 ►L3 Traffic IPv4►Terminate or
Ethernet►10GigE► RFC 2544 ►L3 Traffic IPv4►P1 Terminate.
Technical Support
to display the menu.
,at the top left corner of the screen,
tac@viavisolutions.com
Page 9 of 14
1-844-468-4284