Viavi T-BERD 5800 Testing Manual page 6

8. Reset Test to Defaults
9. Setup
In the Tools Panel,
Press the Setup Soft Key
indicated folders and configure your test as follows. Leave all other values at
default, unless specified in the Work Order.
Folder
Inerface,
Physical Layer
Ethernet
IP
Technical Support
, select
, on the top right side of screen. Select the
Option Value(s)
Autonegotiation See Work Order
Encapsulation None or VLAN
Data Mode IPoE
ARP Mode Enabled
Frame Type DIX
Length Type Packet Length
VLAN ID See Work Order
User Priority 0
Source IP Type
Source IP See Work Order
Default Gateway See Work Order
Subnet Mask See Work Order
Destination IP See Work Order
tac@viavisolutions.com
Page 6 of 14
. Press to continue.
Comment
See Work Order
If Encapsulation = VLAN,
tap to display settings.
Tap
to display settings
1-844-468-4284