Icemaker - Kenmore 111 Use & Care Manual

ICEMAKER

Turning on the icemaker
Whenever the refrigerator is plugged in after being
unplugged, icemaking is automatically set to On. To turn
icemaking Off or On, see the instructions in Shutting
icemaking off.
NOTE: As long as icemaking is turned On in the control
panel, if an icemaker stops production because the ice bin
becomes full, production will resume operation once the
ice bin is cleared of ice.
Dispenser Icemaker Alternate On/Off
The dispenser icemaker is equipped with an On/Off
button in the Inner Control Panel.
You may turn the icemaker On or Off by pressing the
button.
When turned On, the indicator light next to the button will
illuminate.
In case the icemaker doesn't work
• Did you wait for 24 hours after installation of the water
supply line before making ice?
• Is the water line connected and the shut-off valve
opened?
• Did you manually stop the icemaking function?
• Is the freezer temperature too warm? Try setting the
freezer temperature lower.
In case of power failure
In the event of a lengthy power failure, remove ice cubes
in the storage bin as the ice may melt and flow down to
the ice dispenser and leak out.
Place bin back in the icemaker assembly.
FDR 30Cuft_UCG(영+스)(Kenmore)_F840-1.indd 27
USING YOUR REFRIGERATOR
Shutting icemaking off
Important !
If you do not intend to use any ice cubes for longer than
one week (e.g. because you are going on holiday), shut
off icemaking for that period to prevent ice cubes from
freezing together.
1. To turn icemaker ON or OFF: Press the control panel
2. Empty and clean the ice cube bin.
3. Return the ice cube bin into position.
27
Ice Maker button. ON or OFF illuminates in the control
panel display.
To remove ice bin from dispenser icemaker, grasp front
of ice bin and pull forward.
NOTE: There is a handle in front of the dispenser ice
bin for ease of bin removal.
NOTE: The ice bin should be emptied any time the
icemaker is turned off.
2020-02-26 오전 11:53:52