Kenmore 111 Use & Care Manual page 19

HOW TO REPLACE THE PANTRY DRAWER FRONT
1. Extend pantry drawer rails out far enough to reconnect
rail to each side of pantry drawer front. Position pantry
drawer front between rails and align each side with
attachment hole on rail.
2. Insert attachment bolts and use a 10 mm open end or
socket wrench to secure the pantry drawer front to the
rails.
3. Reconnect the harness and reassemble the harness
cover.
4. Slide pantry drawer out until it stops. Replace the
pantry drawer basket.
FDR 30Cuft_UCG(영+스)(Kenmore)_F840-1.indd 19
REFRIGERATOR INSTALLATION
5. Open and close the pantry drawer several times to
19
make sure operation is smooth and seal is consistent all
the way around the pantry compartment.
2020-02-26 오전 11:53:50