Installation - Tripp Lite PDUMH16HV Owner's Manual

Installation

Note: Regardless of installation configuration, the user must determine the fitness of hardware
and procedures before mounting. The PDU and included hardware are designed for common
rack and rack enclosure types and may not be appropriate for all applications. Exact mounting
configurations may vary.
1-1
1U Rack Installation. Attach the PDU to
the rack by inserting four user-supplied
screws A through the PDU mounting
brackets B
the rack rail as shown.
1-2
0U Rack Installation. Part 1: Remove the
screws C attaching the mounting brackets
to the PDU, change the orientation of the
brackets as shown and reattach the
brackets. Use only the screws supplied by
the manufacturer or their exact equivalent
(#6-32, 1/4" flat head). Part 2: Attach the
PDU vertically by inserting two or more user-
supplied screws
mounting brackets
points in the rack or rack enclosure.
1-3
Wall Installation. After repeating Part 1
above, attach the PDU to a stable mounting
surface by inserting two or more user-
supplied screws
mounting brackets
mounting points on the mounting surface.
1-4
Under-Counter Installation. After repeating
Part 1 above, attach the PDU to a stable
mounting surface by inserting four user-
supplied screws
mounting brackets
mounting points on the mounting surface.
14-04-276-93331C.indb 3
and into the mounting holes of
A through the PDU
B and into mounting
A through the PDU
and into secure
B
A through the PDU
and into secure
B
B
1-1
B
1-2
B
1-3
B
1-4
3
A
C
A
C
A
C
A
5/19/2014 2:01:46 PM