Qualcast QSPP46 Instruction Manual page 23

46cm 140cc self propelled keystar petrol rotary lawn mower
Hide thumbs Also See for QSPP46:
Table of Contents

Advertisement

Preparation to re-use
Check the oil level before starting the engine to ensure there is sufficient oil, see page 14.
Check the spark plug is inserted correctly, see page 19.
Fill engine with fresh unleaded fuel, see page 15.
Follow starting procedure, see page 18.
Maintenance schedule
WARNING!
Before you tip the lawn mower onto its side, completely empty the fuel tank using
a petrol suction pump.
Never turn the mower upside down.
Before commencing any maintenance, always disconnect the spark plug.
Performing routine maintenance correctly on your lawn mower will ensure you get years of
trouble-free use. Please keep this manual safe for future reference.
It is recommended that the following maintenance schedule is adhered to. This will ensure
the lawn mower operates correctly and is safe to use.
Cleaning
Air filter
Spark plug
Engine oil
Cutting blade
NOTE: The engine oil should be changed after the first 5 hours.
Cleaning
To ensure long life and good performance of the machine, it's important to keep the
machine clean and well lubricated. Make sure the chute is clean and under the deck is
cleared from wet debris. (See also short term storage).
Do not allow grass cuttings and other debris to become dry and hard on any of the
mower surfaces, as this will directly affect the cutting and grass collection performance.
Make sure that the underside of the lawn mower deck is clean and clear.
Never clean the lawn mower with a water jet or high-pressure cleaner. The engine
must remain dry. Do not use aggressive cleaning agents or solvents, such as cold
degreasers or petroleum ether.
After every use
After 12 hours
use
clean
clean
clean
check
check
check
check
check
After 24 hours
After 36 hours
use
use
clean
clean
clean
replace
check
replace
check
check
check
replace
23

Advertisement

Table of Contents
loading

Table of Contents