Figure 2.6 Modbus-Gw Leds - Honeywell Notifier MODBUS-GW Installation And Operation Manual

Connections
(See Table Below)
Reference
Designator
D1
D2
D3
D4
D7
D8
D9
D10
D11
D12
D22
MODBUS-GW Installation and Operation Manual — P/N LS10015-000NF-E:C2 4/30/2019
D1 D2
D3 D4
D7 D8
LEDs
D9 D10

Figure 2.6 MODBUS-GW LEDs

Table 2.2 LED Definitions
Label
ACTIVE Active/Lit indicates that WinCE is running.
NUPA RX Blinks when data is received on the NUP A port (J4).
PROGRAM Not Used
NUPB RX Not Used
USB B Active/Lit indicates a device is connected to the USB B port (J1).
NUPA TX Blinks when data is sent on the NUP A port (J4).
USB A Active/Lit indicates a device is connected to the USB A port (J2).
NUPB TX Not Used
DATA Blinks to indicate data transmission to or from the Ethernet port (J3).
LINK Active/Lit indicates an Ethernet connection.
WDT FAIL Active/Lit indicates the system has undergone a reset due to a Watchdog
circuit activating.
(J1)
D11
(J3)
D12
(J4)
(J5)
(TB1)
(TB2)
D22
Description
Installation
17