Figure 2.6 Bacnet-Gw-3 Leds - Honeywell NOTIFIER BACNET-GW-3 Installation And Operation Manual

Installation
LEDs
(See Table Below)
Reference
Designator
D1
D2
D3
D4
D7
D8
D9
D10
D11
D12
D22
16
D1 D2
D3 D4
D11
D7 D8
D9 D10

Figure 2.6 BACNET-GW-3 LEDs

Table 2.2 LED Definitions
Label
ACTIVE Active/Lit indicates that WinCE is running.
NUPA RX Blinks when data is received on the NUP A port (J4).
PROGRAM Not Used
NUPB RX Not Used
USB B Active/Lit indicates a device is connected to the USB B port (J1).
NUPA TX Blinks when data is sent on the NUP A port (J4).
USB A Active/Lit indicates a device is connected to the USB A port (J2).
NUPB TX Not Used
DATA Blinks to indicate data transmission to or from the Ethernet port (J3).
LINK Active/Lit indicates an Ethernet connection.
WDT FAIL Active/Lit indicates the system has undergone a reset due to a Watchdog
circuit activating.
BACNET-GW-3 Installation and Operation Manual – P/N LS10014-000NF-E:C6 5/5/2017
(J1)
(J3)
D12
(J4)
(J5)
(TB1)
(TB2)
D22
Description
Connections