Advertisement
Operating Instructions and Parts Manual
42000
High Pressure Abrasive Blast Cabinet
#9 Cylinder Block for tank
Assemble #52 abrasive hose with tee joint
Stand the lower assembly upright as shown, locate #9 Cylinder Block for tank in the
rear, and then assemble #52 abrasive hose with tee joint and install the discharge
hose through the rubber retainer as shown.
8
Advertisement
Need help?
Do you have a question about the 42000 and is the answer not in the manual?
Questions and answers
Hello ,having trouble with Allsource model 42000 cabinet blaster, **** presure remains low and doesnot build pressure is at 110 psi. Not sur which part needs replacement
For low pressure issues in the Allsource model 42000 cabinet blaster, check and possibly replace the nozzle if it is clogged or worn out. Additionally, ensure there is sufficient media in the pressure tank.
This answer is automatically generated