Advertisement
Operating Instructions and Parts Manual
#9 Cylinder Block for tank
High Pressure Abrasive Blast Cabinet
3: Assemble discharge hose with #9
Cylinder Block for tank
3. Place the funnel as shown in the
diagram.
(including bolt, flat washer, lock
washer, nut) and rubber seal
the funnel.
Note: Locate tank service port with
right side funnel on same direction.
Hardware
7
42000
Attach the tank assembly
onto
Advertisement
Need help?
Do you have a question about the 42000 and is the answer not in the manual?
Questions and answers
Hello ,having trouble with Allsource model 42000 cabinet blaster, **** presure remains low and doesnot build pressure is at 110 psi. Not sur which part needs replacement
For low pressure issues in the Allsource model 42000 cabinet blaster, check and possibly replace the nozzle if it is clogged or worn out. Additionally, ensure there is sufficient media in the pressure tank.
This answer is automatically generated