Advertisement
Operating Instructions and Parts Manual
42000
High Pressure Abrasive Blast Cabinet
#4 Abrasive tee joint
1: Open the door, Insert abrasive hose through rubber retainer , adjust the
abrasive hose ,avoid sharp bends to help prevent excessive wearing of the
abrasive hose , next secure the abrasive hose with hose clamp( use
M6X12mm bolts and M6 nut)
2: Assemble abrasive hose and #4 abrasive tee joint, seal thread with Teflon
tape.
13
Advertisement
Need help?
Do you have a question about the 42000 and is the answer not in the manual?
Questions and answers
Hello ,having trouble with Allsource model 42000 cabinet blaster, **** presure remains low and doesnot build pressure is at 110 psi. Not sur which part needs replacement
For low pressure issues in the Allsource model 42000 cabinet blaster, check and possibly replace the nozzle if it is clogged or worn out. Additionally, ensure there is sufficient media in the pressure tank.
This answer is automatically generated