Care, Maintenance And Storage - Honeywell Miller Techline HLLR Series User Instruction Manual

SWING FALLS
Work directly under or along side the lifeline
to avoid hazards of a swing fall. A swing fall
can occur when the anchorage point is not
located directly above the point at which a
worker falls. In a swing fall situation, required
fall clearance increases, and the force of
hitting an obstruction while swinging can
be great and cause serious injury. Always
keep connecting device perpedicular to the
horizontal lifeline to minimize any potential for
a swing fall. Always avoid a possible gable
end swing fall. Never work in an area where a
swing fall hazard exists.

7.0 Care, Maintenance and Storage

Basic care of all fall protection equipment will prolong the durable life of the unit/system and will
contribute toward the performance of its vital safety function.
CLEANING INSTRUCTIONS
Periodically clean system components using a damp cloth and mild detergent to remove any
dirt, paint, or other contaminants that may have accumulated. Wipe dry with a clean cloth and/or
hang freely to dry away from excessive heat, steam or long periods of sunlight.
MAINTENANCE/SERVICE
Servicing must only be carried out by Honeywell Safety Products
in the inspection and replacement of the system.
dates for this system must be maintained. This system and all components must be withdrawn
from service if subjected to fall arresting forces. Only original
proved for use in this system. Non-repairable components that do not pass inspection must be
disposed of in a manner to prevent inadvertent further use. Contact Honeywell Technical Service
at 800.873.5242 if you have any questions.
STORAGE
When not in use, store in a clean, dry location, free of exposure to heat, light, excessive mois-
ture, oil, chemicals, vapors, or other degrading elements.
Us er In stru ctio ns - Engli sh
!
A record log of all servicing and inspection
15
WARNING
SWING FALL
Miller replacement parts are ap-