Maintenance And Troubleshooting; Personnel; Cleaning Windowed Enclosures And Detectors; Model Ss3 Detector - Honeywell Fire Sentry SS3 Installation And Operating Manual

Multi-spectrum digital electro-optical fire detectors
Table of Contents

Advertisement

Model SS3 Multi-Spectrum Digital Electro-Optical Fire Detectors
Installation Guide and Operating Manual
MAN0932_V1_1508002_Rev B_08-12
3.1

Personnel

The following will aid in troubleshooting the Model SS3 Detectors. Tests must be performed by qualified
authorized personnel observing standard safety practices. Although the Model SS3 Detector operates
on safe 24 volts DC, the FM/UL Approved Fire Alarm Panel's power supply may operate on a dangerous
120 or 240 volts AC.
WARNING: Hazardous voltages may be present during testing procedures.
Serious injury or death may result if personnel fail to observe safety
3.2

Cleaning Windowed Enclosures and Detectors

The optical windows on the Model SS3 Detector should be cleaned periodically on a regular
maintenance schedule. For clean applications, this may be every month. However, for extremely dirty
applications a cleaning schedule of every day may be necessary.
Clean the windows on the Model SS3 Detectors whenever they are handled, whenever the windows look
dirty, or whenever the Model SS3 Detector fails to pass an end-to-end test with a Handheld Tester.
Use a blast of an air hose or an oil-free cloth to clean the enclosure windows. Oil degrades the
performance of UV detectors. Occasionally, the use of a solvent such as alcohol may be required. No
disassembly of the Model SS3 Detector is required.
3.3

Model SS3 Detector

CAUTION:
3.4

Detector Repair

Return a defective detector to the factory for repair service.
If a Model SS3 Detector must be shipped back to the factory for repair, it MUST be packed in static
protected material. An RMA (Return Material Authorization) is required for all returns to the factory.
Contact Customer Service for an RMA number before shipping a unit back to the factory.

MAINTENANCE AND TROUBLESHOOTING

DO
NOT
USE SILICONE-BASED OR COMMERCIAL
WINDOW CLEANING PRODUCTS. THEY WILL DEGRADE
THE MODEL SS3 DETECTOR PERFORMANCE.
Model SS3 Detectors are susceptible to permanent
damage due to electrostatic discharge (ESD).
T
HERE ARE
PARTS IN A
SECTION 3
precautions.
NO
USER SERVICEABLE
M
SS3 D
ODEL
ETECTOR
.
5

Advertisement

Table of Contents
loading

Table of Contents