Techline Residential Hll System W/Ra30-2 Roof Anchors - Honeywell Miller Techline HLLR Series User Instruction Manual

3.2 TechLine Residential HLL System
w/RA30-2 Roof Anchors
(Complete system diagram shortened for illustration purposes)
A
B
B
C
- In-Line Shock
Absorber
E. CARABINER
Auto-locking carabiner used to
connect the end of the lifeline to an
approved anchorage
connector.
F. LIFELINE
5/8" (15.9mm) polyester rope used
to span between two anchorage
connectors.
G. O-RINGS
Used to connect worker's shock-
absorbing lanyard, self-retracting
lifeline, or rope grab and vertical
lifeline to the horizontal lifeline.
Us er In stru ctio ns - Engli sh
C
D
- Snap Hook
D
- Lifeline Adjuster/
Tensioner
F
A
- RA30-2 Roof
Anchors
E
- Carabiner
F
- Lifeline
8
G
E
A. RA30-2 ROOF
ANCHORS
Used to secure lifeline to
anchorage point.
B. SNAP HOOK
Self-locking snap hook used to
connect the end of the lifeline to
an approved anchorage
connector.
C. IN-LINE SHOCK
ABSORBER
Designed to limit forces to 2,500
lbs (11.2kN), which
provides a 2:1 safety factor for
5,000 lb (22.2kN) anchorage.
D. LIFELINE ADJUSTER/
TENSIONER
Used to adjust the length of the
rope, indicate proper pre-tension
and maintain tension.
G
-
A