Access Control - TP-Link TD-W9960v User Manual

Chapter 10
5. Select a Service Type
auto-populated. Select
enter the information manually.
6. Specify the IP address(es) that this filtering rule will apply to.
7. Click Save.
Note: If you want to disable this entry, click the

10. 3. Access Control

Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
I want to:
Block or allow specific client devices to access my network (via wired or wireless).
How can I do that?
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set
for the router.
2. Go to Advanced
from the drop-down list and the following four fields will be
Custom when your desired service type is not listed, and
icon.
> Security > Access Control and enable Access Control.
Network Security
58