Chapter 13
1 ) Select the
DHCPv6 Server
IPv6 addresses to hosts.
2 ) Specify the
Start/End IPv6 Address
generate IPv6 addresses within the specified range.
3 ) Keep
Leased Time
4 ) Keep
Site Prefix Type
specific IPv6 site prefix, select
5 ) Keep
WAN Connection
4. Click
Save
to make the settings effective.
13. 3. DSL Settings
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to
Advanced
3. Select a
DSL Modulation Type/Annex Type
the default settings unless necessary.
address type to make the modem router assign
as the default value.
as the default value Delegated. If your ISP has provided a
Static
as the default value.
>
Network
>
DSL Settings
Specify Your Network Settings
for the IPv6 suffixes. The modem router will
and enter the prefix.
page.
from the drop-down list. Do not change
85