Table of Contents
Advertisement
Chapter 10
10. 1. Firewall & DoS Protection
The SPI (Stateful Packet Inspection) Firewall and DoS (Denial of Service) Protection
protect the router from cyber attacks.
The SPI Firewall can prevent cyber attacks and validate the traffic that is passing
through the router based on the protocol. This function is enabled by default, and it's
recommended to keep the default settings.
DoS Protection can protect your home network against DoS attacks from flooding your
network with server requests. Follow the steps below to configure DoS Protection.
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to
Advanced
3. Enable
DoS
Protection.
4. Set the level (Low,
UDP-Flood Attack Filtering
•
ICMP-Flood Attack Filtering
Message Protocol) flood attack.
•
UDP-Flood Attack Filtering
Protocol) flood attack.
•
TCP-Flood Attack Filtering
Protocol) flood attack.
5. Click Save.
Tips:
1. The level of protection is based on the number of traffic packets. Specify the level at
Settings.
>
Security
>
Firewall & DoS
Middle
or High) of protection for
and
TCP-Flood Attack
- Enable to prevent the ICMP (Internet Control
- Enable to prevent the UDP (User Datagram
- Enable to prevent the TCP (Transmission Control
Protection.
ICMP-Flood Attack
Filtering.
Network Security
Filtering,
DoS Protection Level
56
Hide quick links:
Advertisement
Table of Contents
