Table of Contents
Advertisement
Chapter 12
8 ) Enter the
Pre-Shared Key
Secrecy
enabled.
Note: Make sure Site A and Site B use the same key.
9 ) Leave the
Advanced
Note: The
Status
column is
communicating via the VPN connection.
3. Configuration on Site B (remote network). Refer to step 2 configuration on Site A
and make sure that Site A and Site B use the same
Forward Secrecy
4. Check the VPN connection. You can ping site B' LAN IP from your computer in site
A to verify that the IPSec VPN connection is set up correctly.
Tips: To check the VPN connection, you can do the following.
1. On the host in Site A, press
2. In the CLI window, type in "ping 192.168.2.x" ("192.168.2.x" can be IP address of any host in Site B). Then press [Enter].
3. If Ping proceeds successfully (gets replies from host in Site B), the IPSec connection is working properly now.
5. Now IPSec VPN is implemented to establish a connection.
for IKE authentication. Then keep
Settings as default value. Then click Save.
Down
after the configuration, and it will change to
settings.
[Windows Logo]
+
[R]
to open Run dialog. Input "cmd" and hit
VPN Server
Perfect Forward
UP
only when Site A and Site B are
pre-shared keys
and
OK.
Perfect
78
Hide quick links:
Advertisement
Table of Contents
