Table of Contents
Advertisement
Chapter 13
13. 1. LAN Settings
13. 1. 1. Change the LAN IP Address
The modem router is preset with a default LAN IP 192.168.1.1, which you can use to log
in to its web management page. The LAN IP address together with the Subnet Mask
also defines the subnet that the connected devices are on. If the IP address conflicts
with another device in your local network or your network requires a specific IP subnet,
you can change it.
Follow the steps below to change your IP address.
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to
Advanced
3. Type in a new
IP Address
4. Select the
Subnet Mask
the IP address identifies the local IP subnet.
5. Keep
IGMP Snooping
to IGMP (Internet Group Management Protocol) network traffic. The function
prevents hosts on a local network from receiving traffic for a multicast group they
have not explicitly joined.
6. You can configure the modem router's
through which you can also access the web management page.
7. Leave the rest of the default settings as they are.
8. Click
Save
to make the settings effective.
>
Network
>
LAN Settings
appropriate to your needs.
from the drop-down list. The subnet mask together with
enabled by default. IGMP snooping is the process of listening
Specify Your Network Settings
page and select IPv4.
Second IP
and
Subnet Mask
for LAN interface
81
Hide quick links:
Advertisement
Table of Contents
